| | Min | Typical | Max | Units |
|---|
| Power supply AC LVDT/A only (110/230 V AC) 50-60Hz | 99/198 | 110/230 | 126/253 | V AC |
| Power supply DC: LVD/A and /D | 18 | 24 | 28 | V DC |
| Power supply current DC: (depends on loading) | 138 | 145 | 150 | mA (200R) |
| Excitation | | 4.5 | | V rms |
| LVDT Frequency (Selected by Switch 1,2,3,4,5 kHz) | 1 | | 5 | kHz ±20% |
| LVDT Impedance | 50 | 200 | | Ohms |
| LVDT Sensitivity (switchable) | 0.02 | | 10 | V |
| Gain adjustment (Pot - fine adj) | | | 25 | % FR |
| Offset adjustment (Pot - fine adj) | | | 10 | % FR |
| Offset adjustment (Switchable - coarse adj) | | | 30 | % FR |
| Output load (voltage output) | 0 | | 2 | mA |
| Output load (current output) | | | 500 | Ohms |
| Filter cut-off (switchable ranges) | 5 | | 200 | Hz |
| Zero temperature coefficient | | 2 | 4 | µV/ºC |
| Span temperature coefficient | | 0.01 | 0.015 | % FR/ ºC |
| Linearity | | 0.05 | 0.1 | % FR |
| Gain stability- 1st 1000 hours | | 0.2 | 0.4 | % FR |
| 90 day offset stability | | 6 | 10 | µV |
| Operating temperature range | 0 | | 50 | ºC |
| Storage temperature range | -20 | | 70 | ºC |
| Humidity | | | 95 | % |
| Noise (1kHz / 20Hz filter / DC powered) | | 3 | 7 | mV p-p |
| Output Options | ±10V, ±5V, 0 - 10 V, 0 - 5V, 0 - 20mA, 4 -20mA. NB: Current output is link selectable for source or negative sink (common negative or common positive) |
| Connections | Field screw terminals - 2.5mm² rising clamp |
| Enclosure | ABS case 160 x 80 x 55 sealed to IP65 fitted with 3 off cable glands |
| Controls | Gain pot, Offset pot, Coarse gain switches
Coarse offset switches, Filter cut-off switches
Frequency select switch, Output mode switch |
| Environmental |
|---|
| Relative Humidity | 95% maximum non condensing |
| CE Environmental Approvals | European EMC Directive 2004/108/EC, Low Voltage Directive 2006/95/EC |
